Atomic Absorption
Spectrometer and full
capabilities of wet analysis
are performed on each cast and then again on the final blended lots to insure the accurate analysis.
Laboratory also equipped with the latest Phillips X-Ray Spectrometer providing prompt and accurate testing results.
Besides our regular low MgO content products, we are also capable to meet your special requirements, including High Calcium and Barium grades in
a variety of sizes.
Our registered Patents in China and trademark insure that no other Chinese products shall have the same high quality and benefit. The Trade Mark of JIN MAG-SIL is your guarantee that you are receiving the BEST.
You may contact our sales agents/distributors US Alloyss LLC, Hickman Williams and Company, and
Specialty Foundry Products, or you may contact us directly in Foley or Pittsburgh.
Chemical Composition:
Silicon 44.00 - 48.00%, Mg 4.75 - 5.50% and 5.50% - 6.50%, Ca 0.70 - 1.25% or upon request, Cerium
0.45 - 0.60% or upon request, TRE 0.90 - 1.10%, Al 1.25% Max, Ba upon request.
Size: 2 x 1/4", 1-1/2 x 1/4", 1-1/4 x 1/4", 1 x 1/4", 3/4 x 8 mesh, 3/4 x 10 mesh
